#302065 Alu Eccentric Front Upper Pivot Pin Holders (4)
(click to enlarge)
High-quality CNC-machined aluminum arm holders are a great add-on for your T1 to help you fine-tune your steering. Exchange the standard nylon holder for these alu holders and adjust the steering very precisely - exactly how you want or need. These eccentric holders will greatly help you to tune and improve the steering characteristic.
The alu eccentric holders have two holes for placing them in two positions. The first position is the standard position as the original nylon holders in the kits, with hole for the pins in the centerline. When you rotate the holder by 90° you will achieve the second position; here the hole is 1.5 mm off center, which creates the possibility to have multiple positions of the front upper arm.
#305582 One-way Pulley 16T With Grooved One-way Bearing
(click to enlarge)
New one-way bearing for the middle shaft. This bearing has grooves on its outer surface that will prevent any potential rotational slippage inside the nylon pulley.
#303030 Alu Roll Center Bridge
(click to enlarge)
A great, stylish-looking option part CNC machined from high-quality duraluminum will not only add executive look of your T1 but will also enable you to adjust the roll center very easily with 2 different roll center mounting positions. Mount this bridge between both rear bulkheads and insert the adjustable ball of the camber link into the inner position to change the roll center.
#305431 High-Performance Kevlar Drive Belt Rear
(click to enlarge)
Ultra-flex, high-performance Kevlar-reinforced drive belt for top competition. This belt is very thin and as flexible as possible to create much more effective transmissions, saving batteries and eliminating friction. The belt is specially modified… hand-ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
#305441 High-Performance Kevlar Drive Belt Front
(click to enlarge)
Ultra-flex, high-performance Kevlar-reinforced drive belt for top competition. This belt is very thin and as flexible as possible to create much more effective transmissions, saving batteries and eliminating friction. The belt is specially modified… hand-ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
#308030 Alu Shock Spring Retaining Collar (2)
(click to enlarge)
A great add-on! Aluminum CNC-machined shock collars enable the use of the rear longer springs in the front shocks. Use these new collars with the longer rear springs to increase steering, especially if the front shocks are mounted in the outer positions at the lower arms.
